Home Maintenance: Disassembling Wooden Frames Without Eyesight

Have you ever wondered how a completely blind person is able to accomplish home maintenance projects; for example disassembling somewhat large wooden frames around raised vegetable garden beds by touch and sound only?  I would not think most of you have thought about such things therefore I will explain for those interested in learning one person’s technique and strategy.

Why: Over 25 years ago before I went completely blind I built three redwood raised vegetable garden beds in the house we rented.  Over each of the beds I built large redwood frames where I placed weather resistant sun filtering cloth that allows air through but blocked out direct sunlight. I could then manually roll out  the sun filtering  cloth over the frame as needed to protect the plants from the intense direct sun. Since I lost my eyesight in May of 1999 the two remaining garden beds and the frames covering them had developed a desperate need of repair. To start the needed transformation   and the required repair of my vegetable garden area I planned to remove the two frames around each bed that were  left to allow the vegetables to  grow in natural unfiltered sun.  My plan is to recycle and reuse the wood from the frames for plant stakes as well as other uses for the wood around our yard thus preventing the waste of valuable wood and trees.

Strategy: I figured out all the tools I would need ahead of time to complete this project. Since I walk with two canes, one support cane and one long white cane for navigation, I have no extra hands to carry anything when I walk which makes planning crucial. After I located  one philips screwdriver, one flat blade  screwdriver, needle nose plyers, regular plyers, hammer, a plastic bottle of water  and my trusty  Huntsman version of a Swiss Army knife (my go to knife when I used to backpack) I was prepared. My loving wife Kathy set up a chair where I could sit as I worked on my project. Kathy also brought me all the tools I listed including an empty coffee can. This can was used so I could place any hardware in it during the disassembly process. I carefully placed my tools and coffee can near the right side of my chair so I could find everything more easily. Once Kathy had dragged each frame with some difficulty over to me one at a time I was ready to begin my fun.

Fun: As I sat in the chair with  the frame resting  across my legs with it’s four legs pointing in unknown directions I explored all sides of the frame with my fingers and hands to determine the layout  in my minds-eye and as to how I assembled it many years ago. After I had the image of how the frame looked I then determined the best approach to disassemble it. Then I felt around at each joint to determine if I used screws or nails as fasteners.    From feeling small indentations at the center of each fastener with my finger tip I determined they must be screws that held down each metal bracket.  These L-brackets attached each leg to the top square frame I had assembled with the same style brackets. I then selected my Swiss Army knife’s small screw driver and started to remove each screw. Some screws were extremely tight which required me to position myself in my chair in a way to maximize leverage.  This tactic allowed me to keep the required pressure on the screw as I removed each one. After removing a leg of the frame I found a short piece of wood that was connected to it. By feeling no indentation in the top of the fastener on this short piece of wood I determined I had put in nails which held the short piece of wood to the leg.  These short pieces of wood connected each leg on two sides to the top of the frame at 45 degree angles reinforcing each leg. After removing the short pieces of wood by pulling them off by hand or prying them off with the claw end of the hammer I used my plyers or hammer to pull out each nail. To keep my work space organized as I disassembled each section I stacked the shorter pieces of wood to the left of my chair, the longer leg pieces to my right in the corner resting up against the fence and placed all screws, nails and brackets in the coffee can.

When I was working on the second frame I noticed for some reason the screws did not turn, therefore did not loosen. This difficulty made me wonder if these were nails preventing my Swiss Army knife screwdriver from biting in the head of the screw as I attempted to twist it out. I then cheated and asked my wife Kathy if the screws were philips or straight blade types since I could not determent what they were by touching them with my fingertips. After Kathy looked she found some were phillips and others were corroded therefor I switched to my longer handled screw drivers to get more leverage. When I made this minor adjustment I was again well on my way to completion of this project. After removing many screws, nails, and all brackets I was pleasantly surprised when I reached down towards my feet and in front of me where I would keep the frame pieces that still needed work and found nothing but air as I grasped around with outreached hands. I also double checked by kicking out my feet keeping them low to the ground searching by touch and sound for them to connect with something solid  just in case a piece of frame landed out of hands reach during   the disassembly process. I was happy to discover that this test failed to locate any stray pieces, therefore I called Kathy over (she was working in some other area of the yard) to confirm I did not miss any. After verifying with Kathy that the first frame was completely disassembled she dragged the second one over for me to disassemble. When I had completed the second frame and had Kathy confirm that I had, she told me I did not miss disassembling a single piece of wood, removing a screw or any nail. This made me smile with joy.   When I had completed this project I then organized my longer pieces of wood that I placed to my right against the fence to later saw off the damaged parts to prepare each piece for a new life.

What I learned from this simple project:

• Overcoming the thought of completing a project like I describe and doing something that requires more exertion than one is accustomed to or have ever attempted before may be the most difficult part. Because of these challenges it is best to just plan and get started.
• Despite any challenge or disability if one plans thoroughly it is possible to participate in or complete many projects on your own.
• Although disassembling a large wooden frame like I described may be difficult or awkward with challenges such as being blind which is the equivalent of wearing a blindfold or walking around using canes, the satisfaction of completing a project is worth the challenges.
• If assistance is not available and you are forced to improvise and utilize work-arounds, it is still possible to complete projects.
• Being prepared with everything you may need before you start will help reduce the stress of having to stop in the middle of your project to locate something you may need or even worse find out you may be missing something required to complete the project.
• Keep a positive attitude and if you are outside, take advantage of relaxing in the sun, listening to the birds, the wind rustling through tree leaves, breathing fresh air and the joyful sounds of neighbors experiencing life. Pace yourself and enjoy the option to be outdoors.

Does anyone have any stories to share that explain projects you have attempted or completed where you overcame any challenge you may have? Do you have any tips for me and others to help us overcome what some people perceive as challenges to fully participate in projects and life? Any ideas to increase the probability of completing projects when help is limited or not readily available?  Any other experiences you want to share to help us take the required steps to experience all aspects of life, including the uncomfortable, unfamiliar or challenging aspects of enjoying life?

We all look forward to hearing from you.

Bill Tipton

Contributing Author,

Global Dialogue Center

http://www.globaldialoguecenter.com/

LinkedIn: http://www.linkedin.com/in/wdtipton

Facebook: https://www.facebook.com/bill.tipton.39

Twitter: http://twitter.com/wdtipton

Comments

[debbe kennedy]

Hi Bill,
This is a terrific post and the pictures are amazing! You always give me courage to do things I didn't think possible.

Love, Debbe

[Teresa Tabb]

Great Job, Bill! I love reading about how people work with what they have and excel. Love, Teresa